|Hand push belt machine (BSH20-75)|
|One, technical parameters|
Type: hand push type belt machine
Rated voltage: 380 V
Belt size: 2000 x 75 mm
Input power: 1.5 KW
No-load speed: 2840 RPM
Weight: 90 KG
Belt speed: 30 M/S
Note: the above is the standard parameters, the model wheel machine
can accept the specifications, specifically by the customer to
Two, product description:
The turbine has the characteristics of beautiful appearance, simple
structure, convenient use and good performance, and is commonly
used in general industrial and mining enterprises, and has the
1, the motor uses pure copper motor, power, high grinding
efficiency, long life.
2, unique hand push type design, operation free and stable,
effectively improve the grinding efficiency.
3, the speed of the grinding wheel is 30m/s, the national standard,
stable operation, guarantee operation safety.
Three, operating procedures and precautions
1, start the first check, sand machine wheel belt cover is complete
solid, sandpaper is damaged. Check the rear can open, until the
speed can be used after the stability.
2, take the grinding workpiece firmly, and people must stand on the
side of the work equipment, try to avoid the belt rotation surface.
3, grinding the workpiece clamping workpiece should be firmly,
should slowly contact with sandpaper. Can't speed too fast or too
hard, should be uniform grinding.
4, the need to intensify the installation of sandpaper firmly,
grinding objects must use pliers, do not hand directly grinding.
5, can not work on the disc of the larger motion. 6, after the use
of sand machine, should immediately turn off power.