2-5mmMesh welding line XF-25-12502-5mmMesh welding line XF-2/5-1250 (Automatic wire mesh welding
The mesh welding line is especially for the production line that
line wire is from spool and cross wire from pre-straightened and
Welded wire mesh machine is a kind of auto welding equipment
designed and manufactured by ourselves based on absorbing the
advanced electromechanical controlled resistance welding technology
from home and abroad, of which multinomial technologies have won
the national patents.
Our welded wire mesh machine has the following major advantage:
1. Main machine frame is welded with the thicker steel panel and
steel bar. The main structure is more well-set and compact.
2. The cross wire feeding hopper is originative. The cross wire
feeding is automatic and driven by step motor, which makes the
cross wire aligning more accurate.
3. The mesh pulling system is controlled by step motor, which makes
the pulling mesh aperture more standard and accurate.
4. The mesh aperture size welded is diversified. The line wire
spacing can be adjusted through the related parts. The cross wire
spacing adjusting is controlled by microcomputer and it can have 10
5. Welding adopts late-model efficient welding transformer. The
voltage adjusting range is big and it can fall into eight different
grades, which enlarge the range of wire diameter size.
6. In order to adapt the capacity of the clients’ main power
transformer and reduce the rush of the current, electric and
electronic welding control adopt the separating control electricity
input, i.e., the welding transformers don’t work at the same time
but in several times when welding the same row of cross wires.
Line wire spacing
Numbers of welding points
Cross wire spacing
Max welding speed
30-40 strokes per min
Outside transformer capacity
Outside cable requirement
Three 50 m2 copper wires (Equipment is distant from electric
One 20 m2 aluminum wire (used as zero line)
Resistance welding controlled by Silicon-controlled rectifier
(hereinafter called as SCR)
Adjustable in eight different grades through welding transformer
By changing the length of tie rod in pressurizing beam and the
compression of the upper electrode spring
Cross wire feeding way
The cross wire fall off the feeding hopper into welding
automatically one by one driven by step motor
Wire material requirement
Coiled bar dragged annealing material shall meet the related
requirements of carbon structural steel Q195F Carbon Equivalence of
China GB/T701—1997, and the tensile strength shall be above or
equal to 392N/mm. Surface shall be smooth and rustless, without
lime removing agent, fume dirt, water stain, zinc stain (cold or
hot galvanization) or altered drawing wire.