Judy:mobile:15999607314 Mai:judyhuang at sinovoip.com
MSN:sinovoip01 at hotmail.com QQ:1770722839
SinoV-TDM800P_B is a8 port FXS/FXO analog Asterisk PCI card.
SinoV-TDM1200P_B is a12 port FXS/FXO analog Asterisk PCI card.
SinoV-TDM1600P_B is a16 port FXS/FXO analog Asterisk PCI card.
SINOV-TDM1600P_B is a new generation analog card with
interchangeable FXS_200 and FXO_200 modules. It can eliminate the
requirement for separate channel banks or access gateways.
The SINOV-TDM1600P_B contains16 module banks. Each bank supports
one analog interface. The module banks may be filled with up to
FXO_200 or FXS_200 modules enabling the creation of any combination
of ports. Scaling of an analog card solution is accomplished by
simply adding additional cards.
SINOV-TDM1600P_B works with Asterisk®, Elastix®, FreeSWITCH™, PBX
in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as other
Open Source and proprietary PBX, Switch, IVR, and VoIP gateway
1High security: It adopt tertiary thunder preventing technology,
can prevent the thunder and lightning from striking effectively
2, No additional power connector or supplier is required for the
operation of FXS modules, reduced the line wave of the power, has
improved the voice quality
3, 32 bit bus master DMA data exchanges across PCI interface at
132Mbytes/sec for minimum host processor intervention.
4, The high stability firmware is exported / imported with DMA data
exchange, so it accelerated and reduced CPU load greatly. Under the
environment of the same hardware, CPU rate of utilization is equal
to CPU rate of utilization of using 16 port analog card.
5, World Wide Usable: Configurable line interface to meet global
telephone line interface requirements.
6, Support all functions of Asterisk PBX system needed.
7,Easy to install:Both software and hardware compatible with Digium
8 ,Humanization is designed: The module socket that should be
nipped is all adopted and stuck to one slice of sockets, can
prevent stabing users finger effectively .
9 ,For 4U chassis.
1Easy to install , using way is same as DIGIUM Asterisk card
2 If use Trixbox/Elastix/Freeiris2 IPPBX software, it can automatic
recognition our cards, don’t need to install any drivers.
SinoV-TDM1600P_B is a new analog card. It can be used for
connecting analog telephones and analog POTS lines through a PC. It
delivers the superior voice quality on both FXO and FXS interfaces
in all 16 ports.
· Adjustable Interrupt Routing Design
· Interrupts Frequency Adjustment
· Up to16 Simultaneous PSTN Calls (Per PCI Slot)
· Compatible with All Commercially Available Motherboards
· 3-Month “No Question Asked” Return Policy
· Lifetime Warranty
Target Applications· Channel Bank Replacement / Alternative
· Small Office Home Office (SOHO) applications
· Small and Medium Business (SMB) applications
· Gateway Termination to analog telephones/lines
Services and Features
· Caller ID and Call Waiting Caller ID
· ADSI Telephones
· Loopstart Signaling Support
· Up to16 ports through a combination of FXS_200 and FXO_200
· Full-length analog card
· Up to1 quad FXS or FXO modules
· RJ45 connector
· 32-bit 33MHz PCI and fully PCI 2.3 compliant, compatible with all
commercially available motherboards, and proper sharing of PCI
· 32 bit bus master DMA data exchanges across PCI interface at 132
· Autosense compatibility with 5 V and 3.3 V PCI busses compatible
· Power: 8.21W Minimum, 88.24W Maximum at 3.3 V or 5 V.
· Operation temperature: 0°C to 50 °C
· Storage temperature: -40°C to 125°C
· Linux (all versions, releases and distributions from 1.0 up)
Minimum Hardware Requirement
· 800-Mhz Pentium III
· 128MB RAM
· Available PCI Slot