Categories | Donut load cell |
---|---|
Brand Name: | Forsentek |
Model Number: | FDDW |
Place of Origin: | China |
MOQ: | 1pc |
Payment Terms: | T/T, Western Union, MoneyGram,Paypal |
Delivery Time: | 3-20 working days |
Packaging Details: | Shockproof carton |
Supply Ability: | 3000pcs/month |
Material: | Alloy steel |
Capacity: | 120KN 180KN 220KN 260KN 330KN 400KN 500KN |
Output: | Analog output |
Principle: | Strain gauge load cell |
Company Info. |
Force sensor torque transducer |
View Contact Details |
Product List |
Dimensions(unit in "mm“)
Specifications
Rated capacity | 120KN 180KN 220KN 260KN 330KN 400KN 500KN |
Rated output | 2.0mV/V |
Excitation | 5-15V |
Zero balance | ±2% of R.O. |
Nonlinearity | ±0.5% of R.O. |
Hysteresis | ±0.5% of R.O. |
Nonrepeatability | ±0.1% of R.O. |
Creep(30min) | ±0.1% of R.O. |
Safe overload | 150% of F.S. |
Ultimate overload | 200% of F.S. |
Compensated temperature | -10...+40oC |
Operating temperature | -20...+60oC |
Temperature shift zero | ±0.01% R.O./oC |
Temperature shift span | ±0.01% R.O./oC |
Input resistance | 730±50 ohms |
Output resistance | 700±10 ohms |
Insulation resistance | >5000M ohms |
Ingress protection | IP62 |
Material of element | Alloy steel |
Cable | Ø4.8*2000mm(Longer cable available) |
Wiring code | Red--Exc+ Black--Exc- |
A load cell is a transducer that converts load or force acting on it into electronic signal which is proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the load cell.
A standard donut load cell outputs millivolt signal ranging -20~20mV, and signal amplification may be required for most applications, a load cell signal conditioner can be used to get 0~5V, 0-10V or 4-20mA signal which is proportional to applied force.The amplified output is can be easily processed by PLCs and data acquisition software.
The applied force can be displayed through a load cell
indicator,force indicator FPT is integrated with high accuracy/low
noise 24 bit Sigma-Delta ADC,sampling speed up to 960Hz makes it
suitable for both static and dynamic measurement; FPT also supports
Modbus RTU protocol with RS485 or RS232 communication
port,amplified signal 0-5V,0-10V,0-20mV or 4-20mA is also
achievable from FPT.
About Us
Customer Services
Sell On Us
Friendly Links: www.everychina.com
Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们