Cable Wire Single Axis Laser diameter gauge is the high-accuracy installment that uses the laser scan to carry
on the no-contacts on-line measurement. It is mainly used in
measuring of outer diameter and adjusting the extruder screw or
traction speed, to control the outside diameter. It is applicable
to measure and control the diameter of metal wires, glass, pipes,
wire and cable, etc.
It can also be applied to the outer diameter of workpiece and size
1. Technical parameters
|Units of Measurement||mm||mm||mm||mm||mm||mm|
|Standard: RS485 Options:RS232 / USB / Profibus|
|Presets||Diameter, +Tol,-Tol, Alarm Setting|
|Analogues Output||16 bit ±10V DC Output|
|Relay Output||2 Volt Free (Status, Upper Tolerance, Lower Tolerance)|
2. The performance indicators
Measurement: Laser scanning
Laser: Visible red semiconductor laser
Laser output power: <2mW
Operating voltage: ~ 220V ± 15% 50 - 60Hz
Operating temperature: -10 ~ 40 °C
Humidity: <85% RH
Work mode: continuous
Power consumption: <30W
3. The Device with the following Characteristics
i. Can be connected PLC, industrial computer.
ii. RROFIBUS-DP can be allocated and MODBUS converter and PLC, IPC
iii. Can be equipped remote controller DDC-3, DDC-5, on the
extruder and automatic
feedback control to control the tolerance, improve product quality,
4. Display Controller (Model: DDC-5)
i. It be used to remote display and control.
ii. Applicable to DC motors, VVVF motor.
iii.The controller can control the speed of extruder or the tractor
according to the diameter tolerance.
Signal distance: More than 500m
Output voltage: ±10V
With RS485 It can connect to PLC industry controlling computer
The PROFIBUS-DP or MODBUS
Can be selected.
External dimensions:164mm×85mm×280mm (Model:DDC-3)
Installation hole size: 152mm×76mm (Model:DDC-3)
Laser Diameter Gauge Features
1. non-contact laser diameter measurement, high speed, high
accuracy and good repeatability.
2. Real time outside diameter and roundness display, improve
quality control and production efficiency, reduce the wast e of
3. Various digital and analog control signal functions, to achieve
fully automated production.
4. Various preset functions,nominal value, the upper and lower
tolerance, alarm control presets, easy to operate.
5. Standard data port connection ready,compatible software for data
analysis development convenience.
LDM Series Gauge is the classic Mercury-Tech product series, with
decades of technological innovation and more than 1,000 customers
use these products, high accuracy, reliable product. Currently it
is the wire, cable, pipe measurement’s best choice. It develops 10
models in the series .
If you have any questions, please connect to us:
TEL: +86-135 9803 3248
Address: NO.36 Hongsong Road, High-tech Zone, Zhengzhou, CHINA,
Manufacturer: Zhengzhou Mercury-tech Co.,Ltd.