Construction Adhesive with Light Color Low Odor and High Bonding
The JaourMelt this kind glue is a synthetic rubber based hot melt
adhesive specifically developed for construction
applications of nonwoven disposables. It is featured low odor and
light color. It is with good machinability and
provides good penetration and wettability to various substrates,
high bond strength and tack.
The product is suitable for construction adhesive for nonwoven
Appearance : Light yellow transparent solid
Color (Gardner) : ≤ G3
Softening Point (R&B) : approx. 77 ℃
Viscosity (Brookfield) : @120 ℃ approx. 8,700 cps
The material can be applied by all types of spray and slot
applicators. Suggested operation temperature is 130 –
160 0 C for both, depending on machines, substrates, and plant
The product complies with the FDA Indirect Food Contact Regulation
of 21 CFR 175.105, “Adhesives”.
1kg sausage wrapped with meltable film, 25kg/box.
Please consult the sales representative for special requirement.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months,
from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature
below 35 0 C and above 5 0 C.
Direct sunlight and moisture condensation must be prevented.
Do not mix with other adhesives to prevent contamination.
The material is applied hot. Appropriate personal protective
clothing and eye protection are strongly
recommended to prevent burns.
Adequate ventilation is suggested to remove any vapors or fumes
Rotate stocks and using the oldest stock first.