Stable EPE Foam fruit Net Extruder Machine lines(FCEPEW-75)
EPE foam net is a new kind of soft packing material.Due to its
unique expanding reticulation structure and the elastic foamed net
film ,It is widely used for the package of glass products,
precision instrument and various kinds of fruits Technics Flow
This Stable EPE Foam Fruit Net Extruder Machine Line(FCEPEW-75) is
suitable for P 51050,2426k,H2420 high-pressure low density
polyethylene (LDPE) mixed with additives(talc, brightener, distill
monostearte foaming gas under the conditions of temperature,
pressure, and after the collision barrel screw rotation, grinding
squeeze, stir complete physical foaming process. Expansion ratio up
to 20-30 times. PE as raw material for the production of high-foam
plastic products. Such as: plastic foaming, tubes, rods, cloth and
other products. Not suitable for the production of plastic film,
plastic boxes, barrels and other hard non-foamed plastic products.
The Stable EPE Foam Fruit Net Extruder Machine Line(FCEPEW-75) core
components such as barrel, screw, use the 38GrMOALA manufacturing,
temperature, pressure, wear, good mechanical properties, fatigue
strength.To ensure that the technical performance of the equipment,
this unit has a manual, mechanization and automation system
functions. As long as the mixed material into the hopper, through
the barrel, screw, stirring, foam extrusion through a die, cutting
machine cutting, bagging, automatic continuous production
Technics Flow of Stable EPE Foam fruit Net Extruder Machine
Our Stable EPE Foam Fruit Net Extruder Machine Lines(FCEPEW-75)
including main machine cutting machine, butane pump,electric
cabinets, wax pump components, with multiple combinations of high
temperature, high pressure and other features.
Raw material enter extruder—Inject foaming agent—Extruded from mold
head—Cooling and shaping—Hauling off—Cutting off—Packing Technical
Takes polyethylene resin with low density as raw material,injects
shrinking proof agent and foaming agent with high pressure in
extruding process,through screw plasticizing,mixing,water
cooling,extruding from dies,after air cooling,expanding and
traction parts to get finished foaming products.Equipped with other
dies and tractors,the production line can produce tubes,sticks,mesh
Features of Stable EPE Foam fruit Net Extruder Machine
It can produce all kinds of foam net ,foam pipe,foam stick,foam
sheet and so on by changing the mould.
Our factory specializes in EPE foam net machine,our machines enjoy
a high reputation at home and abroad because of excellent quality
and reasonable price.
1.It can produce different kinds of fruit net ,the output is about
800,000-1,200,000per day for 24hours working.
2.It also can produce all kinds of foam sticks,foam pipe,foam sheet
and so on by changing the mould.
3.The machine is of high output,high quality and high efficiency. We
also can design as required.
4.Please tell me what output would you like,what kinds of foam net
would you want the machine produce.I will choose right machine and
send detailed information to you as soon as possible.
5.If you have any questions,please feel free to ask me,I will try my
best to help you whenever you ask me.
Looking forward to your inquiry.
Applications of Stable EPE Foam fruit Net Extruder Machine lines(FCEPEW-75):
40 * 10, 40 * 12 * 14 40 shares of various specifications can be
arbitrarily chosen, widely used in apples, pears, watermelon,
cantaloupe, glassware and other packaging materials.
Installation procedures of EPE Foam Fruit Net Extruder
1.According to the requirements of the device floorplan arrangement,
install the main machine at first , put on leavel place.
2.The cutting roller center traction in a line with the host center,
corresponding parallel, installed.
3.Wax pump pipeline between the metering pump and barrel must be in
circulation, Connecting pipe shall not disclose, otherwise must be
4.Electric cabinet Place flat.
5.Turning each line and each motor power connector ground wire
according to the electrical requirements
Operating conditaion of EPE Foam Fruit Net Extruder Machine
Conditions must have a three-phase power supply, transformer
capacity of 30kw, has good fire performance and ventilated
factories. Ground level concrete floor need to build, install
exhaust fans in the ground close to the butane gas pump, forced
mechanical ventilation. Keep the air fresh and avoid concentration
overrun, to ensure safe operation. Various cylinders should stay
away from the machine, it is best stored separately isolation, not
in the open air production use. The unit is adapted to20-40 degree
. Cylinders house with good drainage
Operating of EPE Foam Fruit Net Extruder Machine Line(FCEPEW-75):
1.First heating, hopper temperature and 1-10 zone temperature reach
to the set temperature , main machine can be opened, material will
be extruded from machine head.
2.Open the main machine, butane gas pump and machine head, let the
main machine speed higher when the machine head extruding large
materials, at the same time, let the butane pump speed higher.
3.Start cooling, until the butane gas pump and machine head up to a
constant speed, the temperature drops to the set temperature.
4.Open haul-off unit and cutting unit, start to adjust the mesh size.
By adjusting the speed of machine head, higher speed, smaller mesh.
5.When the mesh size right, start to adjust the net length. By
adjusting the speed of cutting unit, higher speed, shorter length.
6.When the mesh and length right, start to make throat. Open the
throat switch(single head thoat and double heads throat). Press the
front two buttons on the cutting unit at the same time, change the
single and double throat.
7.Choose the right throat way, then adjust the throat length, the
default data is 1/2, if make the throat length shorter, push the
throat length adjusting button, press the button continuously to
reduce the length(can’t add length), each time press the button,
you must wait to check the finished net, until the net produced as
your request. If adjust wrong, pleas press the throat reset button
in time, the throat length will back to 1/2, then press the throat
length adjusting button to adjust again.
8.At last adjust the cutting unit, press the first or second button,
each time push once, press the button continuously to adjust.
9.If throat adjust wrong, pleas press the system reset button in
time, net will back to the non-throat state, then operate throat
|Main Technical Parameters of Stable EPE Foam Fruit Net Extruder