Ironman Technology Co.,LTD
About us:
We specializes in automation parts and industrial controls,
PLCS,DCS,Module/Board,Power supply,Controller, etc.We maintains an
inventory of new and obsolete parts utilized in all areas of the
manufacturing and industrial sectors.
Featured Brand:
● HONEYWELL ● AB ● OMRON ●SIEMENS ●SCHNEIDER
● ROSEMOUNT● ABB ● NOTIFIER ●MTL ● GE ●And many more !
Honeywell STG700 HART Registered Pressure Transmitter -14.7 to 500
PSI
Lead time:2 WEEKS
New with one year warranty
SmartLine® ST700 Gauge Pressure Transmitters are ideal for
applications ranging from high-pressure measurements in boilers and
fuel feeds to tank level measurement applications with a relatively
high process temperature. Users have the option of choosing between
dual-head and in-line models to match their process interface
requirements.
Dual Head Gauge Pressure Transmitters are suited for typical
applications involving reaction vessels in the chemical industry
and level applications with process temperatures up to 257°F
/125°C.
In-Line transmitters are screwed directly onto a 1/2” male NPT
nipple and can be installed in hazardous environments for accurate,
repeatable pressure measurement. Typical applications include
high-pressure measurement in boilers, fuel feeds and high-pressure
reaction vessels in the petrochemical and hydrocarbon recovery
industries.
The following models are available:
• STG740/ STG745/ STG74L/ STG74S 0-500 psi 0-35 bar
• STG770/ STG775/ STG77L/ STG77S 0-3,000 psi 0-210 bar
• STG78L/ STG78S 0-6,000 psi 0-420 bar
• STG79L/ STG79S 0-10,000 psi 0-690 bar
Part of the SmartLine® family of products, the STG700 and STG70L
are suitable for monitoring, control and data acquisition. STG70X
products feature piezoresistive sensor technology combining
pressure sensing with on chip temperature compensation capabilities
providing high accuracy, stability and performance over a wide
range of application pressures and temperatures. The SmartLine
family is also fully tested and compliant with Experion® PKS
providing the highest level of compatibility assurance and
integration capabilities. SmartLine easily meets the most demanding
application needs for pressure measurement applications.
Select a link under the "item" tab below to order.
Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Table 8
Table 9
X X X X X X X XX X
Table 1 Meter Body Selections
A _ _ _ _ _ a. Process Head & Diaphragm Materials 316L SS
L _ _ _ _ _
_ 1 _ _ _ _ b. Fill Fluid
_ _ A _ _ _ c. Process Connection Same as Process Head
_ _ D _ _ _
_ _ _ 0 _ _ d. Bolt/Nuts Materials
_ _ _ _ 0 _ e. Vent/Drain Type/ Location None
Table 1 Meter Body & Connection Orientation
1 Head/ Connection Orientation High Side Left, Low Side Right / Std
Head Orientation
Table 2 Agency Approvals
0 No Approvals Required
A Explosion proof, intrinsically safe, non-incendive, &
dustproof
B CSA Explosion proof, intrinsically safe, non-incendive, &
dustproof
C ATEX Explosion proof, intrinsically safe & non-incendive
D IECEx Explosion proof, intrinsically safe & non-incendive
G NEPSI Explosion proof, intrinsically safe & non-incendive
Table 3 Transmitter Electronics Selections
A _ _ a. Electronic Housing Material & Connection Type 1/2 NPT
_ H _ b. Output/ Protocol HART Protocol
_ _ 0 c. Customer Interface Selections None
Table 4 Configuration Selections
1 _ _ a. App S/W
_ 1 _ b. Output Limit, Failsafe & Write Protect Settings
High> 21.0mAdc
_ 6 _
_ _ S c. General Config.
Table 2 Calibration & Accuracy Selection
A a. Accuracy & Calibration Factory Std
Table 3 Accessory Selections
0 _ _ _ b. Mounting Bracket None
6 _ _ _
Customer Tag Type
6 _ _ _
_ 0 _ _ No customer tag
6 _ _ _
_ 1 _ _ One wired stainless steel tag (up to 4 lines 26 char/line)
6 _ _ _
_ 2 _ _ Two wired stainless steel tag (up to 4 lines 26 char/line)
6 _ _ _
Unassembled Conduit Plugs & Adapters
6 _ _ _
_ _ A0 No conduit plugs or adapters required
6 _ _ _
_ _ A2 1/2 NPT male to 3/4 NPT female 316 SS certified conduit
adapter
6 _ _ _
_ _ A6 1/2 NPT 316 SS certified conduit plug
6 _ _ _
_ _ A7 M20 316 SS certified conduit plug
6 _ _ _
_ _ A8 Minifast® 4 pin (1/2 NPT) (not suitable for X-Proof
applications)
6 _ _ _
_ _ A9 Minifast® 4 pin (M20) (not suitable for X-Proof
applications)
Table 2 Other Certifications & Options (String in sequence
comma delimited (XX, XX, XX,...)
Certifications & Warranty
FG NACE MR0175; MR0103; ISO15156 (FC33338) Process wetted parts
only
F7 NACE MR0175; MR0103; ISO15156 (FC33339) Process wetted &
non-wetted parts
MT Marine (DNV, ABS, BV, KR, LR) (FC33340)
FX EN10204 Type 3.1 Material Traceability (FC33341)
F3 Certificate of Conformance (F3391)
F1 Calibration Test Report & Certificate of Conformance (F3399)
F5 Certificate of Origin (F0195)
FE FMEDA (SIL 2/3) Certification (FC33337)
TP Over-pressure leak test certificate (1.5X MAWP) (F3392)
OX Cert clean for O2 or CL2 service per ASTM G93
Table 3 Manufacturing Specials
Factory
0 0 0 0 Factory Identification
We have good price on AB PLC,Omron PLC and Honeywell C200,C300,model
number such like TC/TK/MC/CC/511/512/513/514 and some FC series
goods,
If you have other enquiry,pls feel free to let me know.