Sign In | Join Free | My xuijs.com
xuijs.com
Products
Search by Category
Wholesale Marketplace
Home > Machinery >

Safe Crane Spare Parts Overload Protector Load Limiter / Lifting Weight Limiter

Categories Electric Wire Rope Hoist
Brand Name: NANTTE
Model Number: Limiter
Certification: CE
Place of Origin: CHINA
MOQ: 1pc
Supply Ability: 1000000pcs per year
Delivery Time: 1-2weeks
Packaging Details: CARTON
power supply: ~ 380 v + 10%, 50 hz.
relay contact capacity: ~ 250 v, 10 A
using the environment: - 20 ° C ~ + 60 ° C
emergency alarm immediately: lifting weight reaches 130% of the rated lifting weight
early warning: lifting weight reaches 90% of the rated lifting weight
delay emergency alarm: lifting weight reaches 105% of the rated lifting weight
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    Safe Crane Spare Parts Overload Protector Load Limiter / Lifting Weight Limiter

    Crane Safe Overload Protector Load Limiter/Lifting Weight Limiter


    One, product technical parameters:

    1, all the stations were set:

    2, early warning: lifting weight reaches 90% of the rated lifting weight, intermittent sound and light alarm, but not to cut off the circuit.

    3, delay emergency alarm: lifting weight reaches 105% of the rated lifting weight, delay for 2 seconds a continuous sound and light alarm, and cut off the circuit, but does not affect the decline.


    1, immediately alarm point: lifting weight reaches 130% of the rated lifting weight, immediately issued a continuous sound and light alarm, and cut off the circuit.

    2, using the environment: - 10 ° C ~ + 60 ° C, humidity below 90% RH.

    3, power supply: ~ 380 v + 10%, 50 hz.

    4, relay contact capacity: ~ 250 v, 10 a.


    Second, the installation instructions:

    When installation, as shown, installed in a fixed rope, such as no fixed rope, can also be installed in a balance wheel at the bottom of the steel wire rope, balance pulley 20 ~ 30 cm distance.

    Note: when installation, pressure piece of grooves on the steel wire rope, gland nut sensor screws into briquetting and close together.


    Three, connection details:

    This product has four lines, two root power (red, yellow), and two control (blue, green).When the power

    On the control of the 36 v terminals in the cabinet, the two control line series is on the rise of contactor coil control loop, as shown.


    Four, debugging:

    After completion of the overload limiter installation need to debug,

    The first step: reset,

    In the condition of empty hook, hold the meter box - > 0 please key for 3 seconds, the Numbers on the meter to zero and continuous flash for 3 seconds, is reset successfully.

    The second step: I set the alarm point,

    Method one:

    Use crane to lift first rated load weight (note: must be hung from the ground), and then hold the meter box on the M key for 3 seconds, rated weight on the digital display instrument, and continuous flash for 3 seconds, or set a success.(recommended)


    Example: a 5 t single beam crane, right after install the corresponding 5 t overload limiter, when empty hook to hold the first "0" button 3 seconds, and then put the 5 t weight lifting off the ground (must) from the ground, and then press "M" button 3 seconds set value, the full set after the action point load in the range of 5.25 t + / - 5%.


    Method 2:


    With crane lift a weight of a known weight first (note: 50% of the rated weight must be greater than the weight of the weight, and be sure to hang off the ground), and at the same time hold down the "+", "-" key about 3 seconds after the show "0.0" and then press the "+" input to lift heavy things again according to the weight of the "M" key 3 seconds, the digital display to lift heavy objects on the instrument and the weight of the scintillation for 3 seconds, which set a success.(this method for emergency plan, emergency alarm error when debugging by this method will be slightly larger, so it is not recommended)


    Example: a 5 t single beam crane, right after install the corresponding 5 t overload limiter, when empty hook to hold the first "0" button 3 seconds, and then put a weight of a known weight Hanging from the ground (heavy weight must be greater than 2.5 t and must be from the ground), and at the same time hold down the "+" and "-" key about 3 seconds to display "0.0" and then press the "+" input to lift heavy weights known again according to the weight of the "M" button 3 seconds to digital flicker, that is, set success.

    Cheap Safe Crane Spare Parts Overload Protector Load Limiter / Lifting Weight Limiter for sale
    Send your message to this supplier
     
    *From:
    *To: Shaoxing Nante Lifting Eqiupment Co.,Ltd.
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0

    Friendly Links: www.everychina.com

    Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

    Copyright © 2009 - 2024 xuijs.com. All rights reserved.