rotary drill bit

Brand Name:ROSCHEN

Model Number:6

Place of Origin:CHINA

... tricone bits, like: Tricone Bits (Steel tooth & TCI bit), Tri-cone Bit, Three cone bit, Tricone Drill bit, tungsten cabide inserted bits, Tricone rock bit, Milled tooth bit, Roller Cone Bits, matrix body PDC bits, steel body, etc. Structure Features 1)

Brand Name:MIROC

Model Number:IADC517 Tricone Bit

Place of Origin:China

...Rotary Drilling Bit For Well Drilling Rotary drill bits Our rotary drilling bits includes geometries and cemented carbide grades for different surface and compressive strengths, abrasiveness, massiveness and homogeneity of rock as well as for various penetration rates and capabilities and characteristics of the drill...

Brand Name:ENG

Model Number:617XT

Place of Origin:Suzhou, China

...Rotary Drill Bits Water Well Drill Bits Product Specifications Diameter 8 1/2" 216mm Bearing Type Journal bearing/flat rubber seal ring Drilling cycle type Mud circulation Connection thread ty 4 1/2'' REG Operation Parameters Rotary speed (r/min) 40-80 r/min Weight on Bit...

Brand Name:MIROC

Model Number:IADC 517

Place of Origin:China

...Rotary Drill Bit tungsten inserted Drill Bit for Oil gas mining IADC Code Classifications STEEL MILLING TOOTH BITS IADC 1 SERIES DRILL BITS These bits are used to drill low-compressive strength, soft formations. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hardfacing is used to control tooth wear. On the softest bit...

Model Number:IADC517,537,617,637,etc

Place of Origin:China

...used for Oil&Gas Drilling,Mining,Water Well,Geological Exploration areas.Our tricone bit divideds into metal sealed drill bit and rubber sealed bit. 1. The C-Center jet can avoid the formation of a ball in the bit, eliminate the fluid area at the bottom of

Brand Name:Tianying

Model Number:IADC745

Place of Origin:CHINA

...a bit body with three moveable conical rollers equipped with cemented carbide inserts. 2. The idea is the crush the rock by rolling the inserts against the rock with appropriate ...

Place of Origin:Hebei,China

...drill bit, the effect of drilling pressure also needs to be considered. Drilling pressure is the pressure applied to the drill bit through the drill pipe, which can help the drill bit better crush and break rocks. The size of drilling pressure needs to be adjusted reasonably based on the formation hardness and drilling depth to ensure the cutting efficiency of the drill bit and the safety of drilling...

Brand Name:FLRT

Model Number:5 5/8 FW211

Place of Origin:China

...Bit , Rotary Drilling Bit , Rubber Sealed Bearing , TRC Bit RECOMMENDED DRILLING PARAMETERS FOR APPLICATION Types & IADC Code 116 117 126 127 136 137 216 217 246 247 326 327 WOB KN/mm(Bit Dia.) 0.48~1.0 0.48~1.0 0.48~1.0 0.4~1.0 0.4~1.0 0.55~0.85 Lb/in. (Bit Dia.) 2742~5714 2742~5714 2742~5714 2285~5714 2285~5714 3140~4860 Rotation Speed (Rpm) 160~80 150~70 130~60 100~60 80~50 60~45 Roller cone bits...

Place of Origin:Hebei,China

...Bit Tungsten Carbide Drill Roll Cone Bit Oil Well Drilling Describe The emergence of jet three cone drill bits and rotary three cone drill bits has greatly improved the drilling speed of three cone drill bits, and is a major revolution in the development history of three cone drill bits. The embedded tricone bit is inexpensive and of reliable quality, making it essential for inspecting embedded tricone bits...

Brand Name:chuanzuan

Model Number:IADC 127

Place of Origin:china

...Rotary Drill Bit for Oil and Water well Drilling Product Features: 1. Optimized design of bit contour and tooth distribution; 2. Asymmetric blade design, which can balance the forces on the bit; 3. Multiple gauge protection, increases gauge holding capability and bearing life; 4. CFD hydraulic balance design, easy for bit...

Place of Origin:HeBei . China

... carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical shaped inserts are used in all rows to provide cutter durability and long life. IADC WOB(...

Brand Name:JSBIT

Place of Origin:Hebei, China

...Bit For Rotary Drill Bits Product Description Size 140mm 8 1/2 inch roller core bits part Machine Type piling tool/ hole opener roller bit Certification ISO & API Material Carbide Processing Type CAST Use piling engineering Other name roller cutter/Roller cone bits...

Place of Origin:Sichuan, China

Brand Name:KTS

Model Number:Customized

Full Size Carbide Rotary Burr Rotary Drill Bits ISO9001 Approved Shank sizes of your carbide burrs: The shank is the mount of your burr that fits into your rotary tool, die grinder, micro motor etc; so the opposite end to the working part of the tool...

Brand Name:YJ

Model Number:YJ-YL023

Place of Origin:China

...Bit Drilling bits roller bits for Drilling and Mining Product Description Single cone bit is a kind of deceleration bit, which is the speed of cone is smaller than the speed of drill, mainly disorderly cutting broken rock. It is suitable for old well sidetracking and deepening the slim hole drilling operation under high rotary speed and drilling...

Brand Name:New Diamond

Model Number:12 1/4” 311mm Tricone drill Bits

Place of Origin:Hunan, China (Mainland)

... area is small, high pressure, easy to eat into the ground, work The total blade length, and thus reduce wear and tear. Tricone bit to adapt to a variety of stratum from soft to hard. According to the

Brand Name:JWE

Model Number:XD30C-38-75B/XD30C-38-68B

Place of Origin:China

... business is, a carbide bits tool is the first selection to increase your productivity and efficiency, carbide button crowned tools - rotary excavation bits (teeth), should be the important part in excavation and mineral resource or ore production. IN

Place of Origin:Hebei,China

Brand Name:Ruida

Model Number:6(152.4mm)

Oil And Gas Extraction Usage Tricone Drill Bits with Thread Type Tricone Bit Weight *, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height: 1.5;-webkit-font-...

Brand Name:OHANG TECH

Model Number:118-660.4mm

Place of Origin:CHINA

... Teeth) bits can load a higher WOB in normal RPM condition. It applies in different formation from very soft to very hard matched with different cutting structure. ...

Brand Name:SHIELD

Model Number:1/8 Inch Shank Tungsten Carbide Burr Rotary Drill Bits Cutter Files Set

Place of Origin:Hunan China

Shank Tungsten Carbide Burr Rotary Drill Bits Cutter Files Set Specification: Material: 100% tungsten carbide material Shank diameter: 1/8 Inch Compatibility: Smaller rotary tools Features: 1. Hard metal burrs used in pneumatic or electric tools, speed is ...

Brand Name:GLORYTEK

Model Number:12 1/4" etc.

Place of Origin:China

..., have three cones. Each cone can be rotated individually when the drill string rotates the body of the bit. The cones have roller bearings fitted at the time of assembly. The rolling cutting bits can be used to drill any formations if the proper cutter,