38CrMoALA Screw Material 75-250mm ABA 3 Layer HDPE/PP Pipe Making Machine

This HSJ-90/30 HDPE/PP Plastic Pipe Making Machine

This machine is mainly designed for manufacturing HDPE/PP Pipes, which mainly used in irrigation, water supply area. The extruder can process PP/HDPE granules(Both virgin and Recycled, even with chalk-filled composite). The mounted mould on this line is 75-250mm, full set of mould will include every detailed sized mandrel and sizing sleeve.

MOULD SIZE: 75-250mm

75mm, 100mm, 125mm, 150mm, 175mm, 200mm, 225mm, 250mm, totally 8 sizes.

Main Components List:

1.1 HSJ-90/33mm Single Screw Extruder(90kw)

-- Volume 70kg Hopper Drier

-- 300G Automatic Vacuum Loader

1.2 HSJ-65mm Single Screw Extruder(30kw)
-- Volume 70kg Hopper Drier
-- 300G Automatic Vacuum Loader

1.3 HSJ-25 Marking-Line Extruder

2. Mould & Die Head(75mm, 100mm, 125mm, 160mm, 200mm, 225mm, 250mm)

3. Vacuum Cooling Water tank

4. Spraying Cooling Water tank

5. Automatic Traction Machine

6. Automatic Cutting Machine

7. Pipe Stacker Unit(L-6~12m)

(Please note: this is main components from the production line, for the detailed parameter, please contact us freely.)

HSJ-90mm Single Screw Extruder This Extruder is designed specially for processing PP/HDPE Granules, either Virgin Granules or recycled scraps. The Extruder installed with 110kw driving motor , according to the different pipe size, or thickness.

Our SCREW is specially designed according to Chemical Characteristic of the granules. It has the advantages of high tenacity, high impact, good bending performance, high temperature resistance, etc.

MAIN COMPONENTS LIST:
1. Screw & Barrel: 38CrMoAl, LD:30/1, 33/1, Special Gradual Design

2. Visionary Feeding Hopper - detect the material feeding
3. Hopper Drier - Keep the raw material dry before production
4. Clean Operation Panel - Multi-Direction Adjustment

Extrusion Mould: Size 75-250mm

Diameter: 75mm, 100mm, 125mm, 150(160)mm, 180mm, 200mm, 225mm, 250mm

Material: P20, nitrogen process, nitriding layer thickness 0.04-0.07mm

Hardness:

Pipe Stacker This unit is mainly for pipes which cut into pieces, it holds and collects the pipe after the cutting machine. You can pack the pipe into bundles by straps.

TWO STATION PIPE COILER MACHINE This is mainly used for coil the corrugated pipes into rolls, like 50m/roll, 100m/roll. Usually the coiled corrugated pipes are used as electrical conduits, which mainly functions as the protection the cable wires. If add this coiler, you can also extend your business into this area.

* Inquiry and consulting support.

* Sample testing support.

* View our Factory.

* Training how to instal the machine, training how to use the machine.

* Engineers available to service machinery overseas.