Double Junction Gel Filled Inline Ph Probe For Industrial Effluent

Long Service Life Gel-Filled PH Probe Inline For Industrial Effluent

Long Service Life Gel-Filled PH Probe Inline For Industrial Effluent

pH measurement can be applied to various fields such as environmental protection, medicine, food, light industry, textile, papermaking, petrochemical, chemical industry, metallurgy, machinery and so on. The pH glass electrode is a chemical sensor that converts the H+ activity in a solution into a certain potential signal. The pH composite probe developed and produced by Delfino is a stable, reliable and accurate pH sensor suitable for general industrial environments.

Specification

Advantages

• The hemispherical low-impedance glass bubble is composed of a glass membrane that is particularly sensitive to hydrogen ions, with high measurement accuracy, high strength and not easily broken.

• The reference system of the pH sensor is KCl solid gel electrolyte, double connection system, and PTFE diaphragm. It has a fast penetration rate, which greatly extends the life of the electrode and reduces the amount of maintenance.

• The pH electrode has a 1-inch installation thread at the beginning and the end, which is suitable for the installation requirements of various industrial environments.

• Plastic shell pH probes can choose ABS or high temperature resistant, corrosion resistant PPS material.

• The pH electrode is equipped with a temperature sensor to provide accurate measurement. The temperature electrode is NTC or PT1000.

Application

ASP300 series pH electrodes are widely used and can be used in general industrial environments. It is most commonly used in the pretreatment of water in reverse osmosis systems, recovery systems, cooling towers, scrubbers, and factory sewage treatment systems.

However, for different environments, the chemical composition, flow rate, temperature, pH range and pollutant level must be considered to determine the most suitable pH electrode.

Life and maintenance

The life of ASP300 series pH electrode can be up to 2 years. If the electrode can reach its maximum life, correct maintenance is very necessary.

After the PH meter is used, it should be immersed in the PH soaking solution for proper storage, which is very beneficial to improve the slow response of the electrode and prolong the life of the electrode.

After the electrode is taken out of the soaking bottle, it should be shaken in deionized water and shaken dry. Do not wipe the bulb with a paper towel. Use filter paper to absorb it.

Know more about the sensor, Delfino pH ORP Sensor Manual.pdf

Note

Our electrodes are suitable for general industrial environment, ultra-pure water, organic solvents and other special samples, using ultra-low internal resistance sensitive membranes.

For special samples containing hydrofluoric acid and other substances, select the anti-hydrofluoric acid glass sensitive film.

Suzhou Delfino Environmental Technology Co., Ltd. is a professional manufacturer of water analysis instruments and sensors, integrating development and production together. Our main products include online, portable water quality analysis instruments. Since its establishment, we have focused on the development and production of water quality analysis instruments.

The monitoring parameters of water quality analyzer instruments mainly include: pH, ORP, dissolved oxygen, conductivity/TDS/salinity, turbidity, SS, Chlorophyll, Blue-green algae, COD, NH4-N, NO3, free chlorine, peracetic acid and so on.

As the rapid growth of the global economy leads to increased consumption and urbanization, solid waste generation has increased significantly, directly affecting the water and wastewater treatment industry. Daruifuno aims to provide solutions to various industries and fields and create a cleaner and healthier drinking water environment for the earth.

Our products mianly application for follows industry：Municipal sewage water treatment plant, industrial wastewater treatment plant, Chemical, Petroleum, Papermaking, Food and drinking, Medicine, Electroplating, PCB plant, fish farm,Lake/river/ocean/groundwater/surface and so on.

Our company was established in 2015, but our predecessor has been committed to the water quality testing industry for more than 10 years. At present, we have our own R&D center with many senior engineers with more than 10 years of experience in the research and development of water quality analyzers and water quality sensors, and are equipped with strict front-line production workers, professional quality inspection personnel and testing equipment to check every process.

As a high-tech enterprise in China, our production is strictly in accordance with ISO9001 from raw material sources to finished equipment. After years of efforts, the company has obtained more than 20 patent certificates, high-tech enterprise certificates, CE, SGS, etc. He has accumulated rich practical experience in the field of water quality testing and has unique insights in the field of water quality testing.

Our company takes "reasonable prices, efficient production time, and good after-sales service" as its purpose and adheres to the business philosophy of "based on quality and creating value for customers". At present, the company is actively exploring the international market and actively promoting its own brands and products. It has been exported to Asia, Southeast Asia, Europe, Africa, and South America, with customers in more than 50 countries and regions around the world. And hope to develop together with customers for mutual benefit with high-quality products and sincere services.