4 20ma signal isolator

Brand Name:LS

Model Number:THS-TPXX

Place of Origin:China

...signal: PT100, Cu50, Ni1000 and other thermal resistance; B, E, J, K, N, R, S, T and other thermocouples; voltage (maximum range 0-10V); millivolts (maximum range 0-100mV); Current source (4- 20mA); transmitter (distribution), current 4-20mA; resistor, potentiometer (maximum range 0-2K) Distribution voltage: ≥16V Measuring range: depending on the type of sensor used Output Output signal: 4-20mA; 0-20mA...

Place of Origin:China

Brand Name:JSD

Model Number:0-5V/0-10V/4-20mA

..., converting into a DC signal proportional output, the isolation amplifier module front stage is the voltage (current) signal input, Backend is a current (voltage) signal output, Integrated on the same chip a multi-isolated micro-power supply to the

Brand Name:LS

Model Number:LS-TEK-TAI

Place of Origin:China

... the output is a voltage signal) Basic parameters Power supply: DC24V, ±10% or AC85-265V Rated power: ≤1W (one input and one output, DC24V power supply, 20mA output) Basic accuracy: ≤0.5% F.S. Temperature drift: 0.02% F.S./degree (-20 degrees ~

Brand Name:LS

Model Number:LS-TET-AI

Place of Origin:China

... signal) RL ≥ 10KΩ (when the output is a voltage signal) Basic parameters Power supply: DC24V, ±10% Rated power: ≤1W (one input and one output, DC24V power supply, 20mA output) Basic accuracy: ≤0.5% F.S. Temperature drift: 0.02% F.S./degree (

Place of Origin:Shenzhen,China

Brand Name:JSD

Model Number:0~200Ω/0~500Ω/0~5KΩ/0~10KΩ to 4~20mA/0~20mA/0~5V/0~10V/0~±5V/0~±10V/0~10mA

...signal Isolation transmitter selection example: example 1:signal in:0-50Ω； signal out:0-10V； power supply:12VDC；model:DIN35 1x1 OI-R1-P3-VO5 example 2:signal in:0~10KΩ； signal out :4-20mA；power supply:24VDC；model:DIN35 1x1 OI-R8-P1-IO1 Resistance signal Isolation transmitter Features: ◆ Small size, low cost, international standards DIN35mm rail mounting ◆ three-port isolation...

Place of Origin:SHENZHEN,CHINA

Brand Name:JSD

Model Number:4~20mA/0~5V/0~10V/1~5V/0-100mV/0~20mA/0~10mA

... supply:12VDC；model:JSD TA-2002-214 Example 3:input 1:0-5VDC；input 2:0-5VDC； output 1:0-5VDC； output 2:4-20mA； power supply:24VDC；model:JSD TA-2002-111 Example 4:input 1:0-10VDC；input 2:0

Place of Origin:China

Brand Name:JSD

Model Number:0-5V/0-10V/0-100mV/4-20mA/0-20mA

...Signal input:0-5V；signal output: 0-5V； power supply:5VDC； Model:JSD OI-V1-P4-VO4 Example 2:Signal input:4-20mA；signal output :4-20mA；power supply:24VDC；Model:JSD OI-I4-P1-IO1 0-5v to 4-20mA signal converter Selection Example: Example 1: Signal input:0-5V；signal output: 4-20mA； power supply:5VDC； Model:JSD OI-V1-P4-IO1 Example 2:Signal input:4-20mA；signal output :4-20mA...

Brand Name:JSD

Model Number:JSD TA-1002-

Place of Origin:SHENZHEN,CHINA

... is a signal conditioner with electrical insulation between input and output, it can receive a variety of analog signal from the field instrument, and transmit a standard output signal or user-specified special signal to the control room,PLC,PC or DCS. The

Brand Name:WAYJUN

Model Number:DIN11 IAP - V(A)□ - P□ - F□

Place of Origin:CN

...output signal :0-5KHz / 0-10KHz/1-5KHz standard signal >> Auxiliary power supply: 5V, 9V, 12V, 15V or 24VDC >> Full scale high linearity (non-linearity <0.1%) >> Isolation voltage: 2500VDC (1mA, 60S) >> Three-port isolation:input / output / power supply >

Brand Name:WAYJUN

Model Number:DIN11 IAP - V(A)□ - P□ - F□

Place of Origin:CN

...output signal :0-5KHz / 0-10KHz/1-5KHz standard signal >> Auxiliary power supply: 5V, 9V, 12V, 15V or 24VDC >> Full scale high linearity (non-linearity <0.1%) >> Isolation voltage: 2500VDC (1mA, 60S) >> Three-port isolation:input / output / power supply >

Brand Name:WAYJUN

Model Number:DIN11 IAP - V(A)□ - P□ - F□

Place of Origin:CN

...output signal :0-5KHz / 0-10KHz/1-5KHz standard signal >> Auxiliary power supply: 5V, 9V, 12V, 15V or 24VDC >> Full scale high linearity (non-linearity <0.1%) >> Isolation voltage: 2500VDC (1mA, 60S) >> Three-port isolation:input / output / power supply >

Brand Name:LS

Model Number:LS-TET-I

Place of Origin:China

...Ω (when the output is a voltage signal) Basic parameters Power supply: DC24V, ±10% Rated power consumption: ≤1W (one input and one output, DC24V power supply, 20mA output) Basic accuracy: ≤0.2% F.S. Temperature drift: 0.02% F.S./degree (-20 degrees ~

Brand Name:JSD

Model Number:JSD TFA-1001

Place of Origin:SHENZHEN

...signal to analog signal isolation transmitter (F/V,F/I converter) Features: ◆ Low cost, thin design, international standards DIN35mm rail mounting ◆ Three-port isolation (input, output and power supply ) ◆ High accuracy (0.1% F.S, 0.2% F.S) ◆ High linearity (0.1% F.S),High isolation...

Brand Name:WAYJUN

Model Number:IAP 4-20mA

Place of Origin:CN

... Accuracy (Distortion<0.2%) >>High Linearity (Non-linearity<0.2%) >>Frequency Response (small signal bandwidth) :50HZ (Io=20mA) >>Low Impedance (<2V) >>International Standard SIP 12 >>SIP12 circuit board mounted >>Temperature Range: -40°C~+85°C Part No

Brand Name:WAYJUN

Model Number:IAP 4-20mA

Place of Origin:CN

... Accuracy (Distortion<0.2%) >>High Linearity (Non-linearity<0.2%) >>Frequency Response (small signal bandwidth) :50HZ (Io=20mA) >>Low Impedance (<2V) >>International Standard SIP 12 >>SIP12 circuit board mounted >>Temperature Range: -40°C~+85°C Part No

Brand Name:WAYJUN

Model Number:DIN12 IAP – M□ - P□ – V(A)□

Place of Origin:CN

.../24VDC >> Input low frequency signal: 0-20Hz / 0-50Hz/0-100Hz >> Output two standard 0-2.5V/0-5V/0-10V voltage signal or two 0-10mA/0-20mA/4-20mA current signal >> Small size, the standard DIN35 rail installation >> Industrial temperature range: -20 to

Brand Name:JSD

Model Number:JSD TA-1002-D11

Place of Origin:CHINA.SHENZHEN

... and Mutual isolation between channels) ◆Passed CE Certificate ◆High accuracy (0.1% F.S, 0.2% F.S) ◆Full-scale range (<0.2% F.S) ◆High isolation voltage (2500VDC/60S) ◆Low temperature drift (100PPM/℃) ◆Wide operation temperature (-45~+85℃

Brand Name:Acrel

Model Number:BM100-DI/I

Place of Origin:China

... speed and accurately, and can be converted into standard analog signal output after the isolation device. It can be directly connected with pointer meter and digital display meter, and can also be connected with automatic control instruments (such as PLC)

Place of Origin:China

Brand Name:JSD

Model Number:Pt100/PT1000/PT10/Cu50/Cu100

...signal Isolation transmitter Selection example: Example 1:Signal input:Pt100；temperature range:0~150℃；power supply:12VDC；signal output:4-20mA；model:DIN35 1x1 OI-TRZ2-T3-P3-IO1 Example 2:Signal input:Cu50；temperature range:0~400℃；power supply:24VDC；signal output:0-5VDC；model:DIN35 1x1 OI-TRZ5-T5-P1-VO4 PT100 RTD Temperature signal Isolation...

Place of Origin:China

Brand Name:JSD

Model Number:Pt100/PT1000/PT10/Cu50/Cu100

...signal Isolation transmitter Selection example: Example 1:Signal input:Pt100；temperature range:0~150℃；power supply:12VDC；signal output:4-20mA；model:DIN35 1x1 OI-TRZ2-T3-P3-IO1 Example 2:Signal input:Cu50；temperature range:0~400℃；power supply:24VDC；signal output:0-5VDC；model:DIN35 1x1 OI-TRZ5-T5-P1-VO4 PT100 RTD Temperature signal Isolation...