bending test standard

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made in China

...testing of the multi-wires cable, communication cable, earphone cable etc. Cables bending resistance testing method is short –circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and

Brand Name:Herrman

Model Number:GWQ-90

Place of Origin:China

...bending testing machine optic fiber cable repeat beading detector DESCRIPTION The equipment is used to test optical cable resistance repeated bending properties. By applying repeated bending force, for the qualified optical cable, no fiber fracture, fiber attenuation values meet standard, no optic cable jacket cracking. The equipment adopts the man-machine interface and PLC control, TFT true color screen display test

Brand Name:HeJin

Model Number:HDX1307

Place of Origin:China

... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a

Brand Name:wangtebei

Model Number:GW-40

Place of Origin:China

...bending test and rebending test and check whether there is crack after test in bending plastic deformation for plain round bar, ribbed bar, straight steel bar, steel tube, etc. Used for bending test of steel bar for HPB235,HPB300,HRB335/HRBF335,HRB400/HRBF400,HRB500/HRBF500,CRB550,CTB550/CTB650 (Diameter less then 40mm). It can be used for any angle bending test within 0°-180°. 2. Test Standards...

Brand Name:Infinity Machine

Model Number:RS-8106B

Place of Origin:Made in China

... to do bending test. Test method is: short-circuit clamping one end of wire and fastening it on the rotary disc, leaving it rotating right and left hanging certain load, to assess whether wire is in good conduction after certain test cycles (can be set).

Brand Name:Haida

Model Number:HD-M006

Place of Origin:China

... Handle Bending Testing Machine/Furniture Bending Tester 1.Product Introduction The machine is used to test bending strength of handle, under specify load on handle slowly, check the fastness of connection between two parts. 2.Standard Paraments Servo...

Brand Name:Sinuo

Model Number:SN1112E

Place of Origin:China

...IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to ...

Brand Name:Infinity Machine

Model Number:RS-8116-6B

Place of Origin:Made in China

... Bending Testing Machine/Cable Testing Equipment for Headphone Line or USB Line Model: RS-8116-6B Purpose: It is suitable for bending resistance test on headphone cable, USB cable, multicore cable conductor,flat cable and signal line,etc. The test method...

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made In China

...Automotive Cables Cyclic Test Machine Model: C5092 Purpose This automotive cable bending test machine is designed for cyclic bending testing of multi-wire cables, communication cables, earphone cables, and similar products. The testing method involves ...

Brand Name:RECEN

Model Number:RC-TM-003

Place of Origin:China

... stretching, compression, bending, shearing and other tests. Applicable standards: meet relevant test standards such as GB / T228.1-2010, ISO, ASTM, etc. Features: 1. The testing machine adopts four-column, double-space frame structure, which has the

Brand Name:Haida

Model Number:HD-B609BS

Place of Origin:China

...Testing Machine High Precision Bend Test Equipment Universal Material Testing Machine HD-B609B-S Universal Test Machine.pdf Product Description: Tensile Test Machines are designed and manufactured according to ASTM, ISO, DIN, GB and other international standards. Applicable for wide range of material for tension, compression, bending, shearing and low cycle test...

Brand Name:AI

Model Number:AIBXW-16

Place of Origin:CHINA

...standard: GB/T4074.3-2008,IEC60851-3; 2.This bending test apparatus is applicable to the bending test of various enameled flat wires, paper wrapped flat wires, glass fiber wrapped flat wires, film wrapped wires and other electromagnetic wires with a wide edge of less than or equal to 16mm, as well as the corresponding copper and aluminum flat wires. Major Technical Parameters Bending...

Brand Name:Sinuo

Model Number:SN1112C-1

Place of Origin:China

...Bending Testing Machine Household Appliance Test Product Information: Standard: IEC60335-2-84:2005 clause 23.3. Specimen and Limitations: Toilet with heated seat Test purpose: Used to test the bending resistance of the internal wires entering the appliance part of toilets with heated seat cushions to verify their reliability. Test...

Brand Name:JIEDONG

Model Number:JD-3002

Place of Origin:Guangdong, China

... used for flexible circuit boards (commonly known as software circuit boards) for flexural testing, such as mobile phone, PDA, electronic dictionary, laptop computer and other electronic products FPC soft board flexure resistance, flex life Test test. This

Brand Name:Infinity Machine

Model Number:RS-8105A-5

Place of Origin:Made in China

...Bending Test Machine High Precision With 7" Touch Panel Model: RS-8105A-5 Purpose: The tester is suitable for the bending testing of the multi-wires cable, communication cable, earphone cable etc. The testing method is short –circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable if conducting after some rotation testing

Place of Origin:China

Brand Name:Lonroy

... mainly assesses whether the wires will crack and their voltage resistance performance under low-temperature dynamic conditions. This testing machine should be used in conjunction with a -40℃ low-temperature chamber. Test standard The requirements of

Brand Name:Sinuo

Model Number:SN2143

Place of Origin:China

...Bending Test Machine Product information: Applicable Standards: JIS C 8303 Figure 2 and Clause 7.10 AS/NZS 3112:2017 Figure 2.8 and Clause 2.13.7.2 Test Samples:Plugs with insulating sleeves. Application: Used to test the bending resistance of plug pins with insulating sleeves, in order to verify the mechanical strength of the plug structure. Test...

Brand Name:Infinity Machine

Model Number:RS-8010 & RS-8010A

Place of Origin:Made in China

...Bending Test Machine Capacity 5 KN AC Servo Motor High Accuracy Model: RS-8010 & RS-8010A Purpose: This test machine is suitable for adhesive tape, rubber, plastic, sponge, waterproof materials, electric wire & cable & thread, textile, net rope, non-woven fabrics ect nonmetal materials and metallic thread, metal foil, steel plate and metal rod to do stretching, compression, bending, peeling, cutting, tearing tests...

Brand Name:Infinity Machine

Model Number:RS-8000SA

Place of Origin:Made in China

...compression, flexural, peel, shear, tear, bursting, , fatigue tests for wire, metal foil, sheet metal and metal tape, rubber, plastic, air / sea foam, waterproof materials, wire and ...

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made in China

... cable, earphone cable etc. Cables flexible testing method is short –circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to ...