morse taper shank drill

Brand Name:JCDRILL

Model Number:All models

Place of Origin:China (Mainland)

... chuck section to provide leverage for the rotation chuck bushing. It usually has a forged collar to maintain the proper shank striking face position in the rock drill, and a tapered bit end. Tapered steel lengths— available from 0.6m to 3.6 m in

Brand Name:MTH

Model Number:7 degree

Place of Origin:CHINA

...: The tapered drill rod can be matched with multiple drill bits to drill blast holes with different diameters. The tapered drill rod also has the advantages of no need of scrapping after abrasion of drill bits, simple maintenance, low price, low cost of

Brand Name:JCDRILL

Model Number:All models

Place of Origin:China (Mainland)

.... It usually has a forged collar to maintain the proper shank striking face position in the rock drill, and a tapered bit end. Tapered steel lengths— available from 0.6m to 3.6 m in length—are measured from the collar to the bit end. Characteristic A

Brand Name:MIROC

Model Number:Tapered button bit

Place of Origin:China

tapered button drill bit 7 buttons OD 34mm 36mm 38mm What can you get from KSQ? 1. Good service for the products purchased 2. Good quality control of products produced 3. Reasonable prices for the products offered 4. Best advices based on the experience and knowledge of well know what to do and how to do Product Description Bit diameter: 32mm to 42mm Body height: 50mm, 55mm,60mm Taper/Grade: 6 degree, 7 degree, 11 dregree, 12 degree Shank

Brand Name:MTH

Model Number:11 degree 1220mm length

Place of Origin:CHINA

...multiple drill bits to drill blast holes with different diameters. The tapered drill rod also has the advantages of no need of scrapping after abrasion of drill bits, simple maintenance, low price, low cost of drilling each meter, etc. Prodcut information:

Brand Name:MING

Model Number:MZ0732-12

Place of Origin:CHINA

...Tapered Rock button bit for rock drill Product category: DTH taper drill bit Matched connection: 12 degree taper Diameter: 32mm KINGDRILLING DTH taper drill bit description: Taper button bit as small hole bit is different with thread button bit as long hole bit to use taper rod to be used for air leg or hand held jack hammer driller in quarrying,and mining. (1)Connect shank...

Place of Origin:Hunan, China

Model Number:Twist Drill

... superior sharpness and strength, make chip-remove smoother. 3.140° Angle design reduces feed force in initial stage of drilling,

Brand Name:JOHNSON TOOLS

Model Number:D12

Place of Origin:CHINA

Product Name 5pcs HSS Titanium Triangle Shank step cone taper drill Bits Set for Metal Drilling Size 6Steps: 3/16-1/2''(3/16,1/4,5/16,3/8,7/16,1/2) 8Steps:1/4-3/4''(1/4,5/16,3/8,7/16,1/2,9/16,5/8,11/16,3/4) 9Steps...

Brand Name:JCDRILLS

Model Number:Shoulder Drive Drilling Tools

Place of Origin:Hebei,China

... in all 3 standard rock drill shank sizes - Hex.22*82.5, Hex.22*108, Hex.25*108 and is intended for general duty use. Bits are available from 35mm- 76mm. 1. The ordinary connection taper degree is 7º, 11º and 12º, other degrees like 4.8º, 6º and 9º

Brand Name:OED/OEM

Model Number:Taper Angle: 4, 6, 7, 11, 12 degree

Place of Origin:China

...° Hex25 × 108mm 1500 ~ 4,000 4’11” ~ 13’1” 7° Hex25 ×159mm 1830 ~ 6,100 6’ ~ 20” 7° And 12° Notes: 1. The Ordinary Connection Taper Degree Is 7º, 11º And 12º,

Brand Name:OED/OEM

Model Number:Taper Angle: 4, 6, 7, 11, 12 degree

Place of Origin:China

...° Hex25 × 108mm 1500 ~ 4,000 4’11” ~ 13’1” 7° Hex25 ×159mm 1830 ~ 6,100 6’ ~ 20” 7° And 12° Notes: 1. The Ordinary Connection Taper Degree Is 7º, 11º And 12º,

Brand Name:AOJIA

Place of Origin:CHINA

Coated Taper Shank Gear Shaper Cutter The coated tool is to coat a thin layer of refractory metal or non-metallic compound with good wear resistance on the ...

Brand Name:AOJIA

Place of Origin:CHINA

Small Taper Shank Turning Cutter Tool material should have basic properties The choice of tool material has a great influence on tool life, machining efficiency, ...

Brand Name:AOJIA

Place of Origin:CHINA

Bowl-Shaped Taper Shank Turning Cutter Expert seminars on product production 1. Discussion on technical issues 2. Solution formulation 3. Development and implementation of manufacturing process flow 4. Completion time and result tracking

Brand Name:AOJIA

Place of Origin:CHINA

Coated Taper Shank Gear Shaper Cutter The coated tool is to coat a thin layer of refractory metal or non-metallic compound with good wear resistance on the ...

Brand Name:AOJIA

Place of Origin:CHINA

Small Taper Shank Turning Cutter Tool material should have basic properties The choice of tool material has a great influence on tool life, machining efficiency, ...

Brand Name:AOJIA

Place of Origin:CHINA

Bowl-Shaped Taper Shank Turning Cutter Expert seminars on product production 1. Discussion on technical issues 2. Solution formulation 3. Development and implementation of manufacturing process flow 4. Completion time and result tracking

Place of Origin:China

Brand Name:Jinquan

Model Number:Threaded & Tapered

Tapered drill steel rod is connected with jack hammer rock drills via forged hex steel collar, and when connected with tungsten carbide drill bits/head, with the method of pyramidal/conical structure. The normal conical degree is 6, 7, 11, 12 etc. This type of tapered rod is most widely used in various types of drill rods, owning the largest proportion in the drilling tools fields. The hollow small section of drill...

Brand Name:OED/OEM

Model Number:Taper Angle: 4, 6, 7, 11, 12 degree

Place of Origin:China

... Upon Request; 2. The Ordinary Shank Is Hex22 × 108mm, Hex25 × 159mm And Other Styles Are Also Available If Upon Customers’ Request; 3. The Rod Length Must Be Specified In Order; 4. In Order To Adapt To Different Rock Conditions, The Drill Rod Is

Brand Name:OED/OEM

Model Number:Taper Angle: 4, 6, 7, 11, 12 degree

Place of Origin:China

... Upon Request; 2. The Ordinary Shank Is Hex22 × 108mm, Hex25 × 159mm And Other Styles Are Also Available If Upon Customers’ Request; 3. The Rod Length Must Be Specified In Order; 4. In Order To Adapt To Different Rock Conditions, The Drill Rod Is