needle flame test apparatus

Brand Name:Pego Group

Model Number:PG-SIT

Place of Origin:China

...Test Apparatus for Testing Flame Resistance of Flexing Parts 1. Introduction The spark ignition test apparatus meets the requirements of IEC60335-2-17 clause 30.101 and figure 112. It’s used for the flame resistance test of the flexible parts to check if the arcing of conductors will cause the sample to be overheated or burned. The test apparatus is consisted by control box and test...

Brand Name:VOUCH

Model Number:5910

Place of Origin:CHINA

...road, so in the prevention of fires, smoke density of the test material is essential. Smoke Density Test Apparatus for Building Materials conforms to the national standard ISO5659-2 ASTM E662 BS 6401 GB/T 8323 specification and requirements, can be used to

Brand Name:PEGO GROUP

Model Number:PG-NF

Place of Origin:China

...Needle Flame Flammability Testing Equipment - 12 Months Warranty 1. Introduction The Needle Flame Tester consists of a dia.0.9mm needle burner that tilts to 45 degree from the vertical and is fueled with butane gas. The fire hazard of the specimen is assessed by measuring the burning duration of the specimen, and any ignition of the wrapping tissue and white pine board below the specimen. The equipment specifies a needle-flame test

Brand Name:VOUCH

Model Number:5300

Place of Origin:CHINA

...Test Apparatus For Automotive InteriorParts Testing In Laboratory Technicial data: Standard:GB/8410,TL1010,GMW3232,FMVSS302 SIZE: 395W*215*540H Size of tester:385w*204*306h Flame height adjustment:10-200mm Burning time adjust ment range:0-99.99s Blance flame timing range:0.0s-99h59m59.9s Burning time resolution:0.01s Blance flame...

Brand Name:YUYANG

Model Number:YY162

Place of Origin:China

... the current advanced embedded computer control, to achieve full intelligent control. The needle flame test is to use a needle burner of the specified size (Φ0.9mm), with a specific gas (butane or propane), and the sample is fired at a 45° angle. The

Brand Name:JHH

Model Number:XRW-300D

Place of Origin:Beijing, China

...Needle Apparatus Needle And Accessories HDT Vicat Tester Product Description: Vicat Softening Needle Apparatus Needle And Accessories HDT Vicat Tester is a versatile and reliable testing apparatus for determining the Vicat softening temperature of plastics, ebonite and long-fibre-reinforced composites. It has a data output of computer and a power supply of 220V, 50/60Hz. This testing...

Brand Name:VOUCH

Model Number:5300

Place of Origin:CHINA

...-200mm Burning time adjust ment range:0-99.99s Blance flame timing range:0.0s-99h59m59.9s Burning time resolution:0.01s Blance flame time resolution:0.1s Surface of box:white (powder baking varnish) Features of machine: 1.)In accordance with

Brand Name:Delta

Model Number:BS476-7

Place of Origin:China

...Flame Surface Spread Testing BS476-7 Test Apparatus Introduction: Applicable to the British building materials and high iron flame retardant test standard, conform to the standards for BS 476-7, the method of the test to determine the classification of the surface spread of flame of products. Building Material Flame Surface Spread Testing BS476-7 Test Apparatus is mainly used for the determination of the extension of the flame

Brand Name:HongCe

Model Number:NF-2

Place of Origin:China

0.5m³ Needle-Flame Tester Plc Control The New IEC60695 Flammability Test Machine Products Introduction This part of IEC 60695 specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess...

Place of Origin:China

Brand Name:HongCe

Model Number:HVF-3A

... requirement of UL94,IEC60695-11-2, IEC60695-11-3, IEC60695-11-4, IEC60695-11-20. It simulates the influence of early-stage flame when there is a fire around the electric and electronic products, so that to judge the igniting danger degree. It is

Brand Name:YUYANG

Model Number:YY436

Place of Origin:China

...Testing Equipment Radiant Panel Flame Spread Surface Test Apparatus Description: The Radiant Panel Flame Spread Apparatus measures the surface flammability of building products (ASTM E162) and cellular plastics (ASTM D3675) by using a gas-fired radiant heat panel. The test result is an index that is determined from the flame...

Brand Name:YUYANG

Model Number:YY140

Place of Origin:China

... of components or parts, poor contact, etc. may cause a flame, which may then be directed to nearby parts. The needle flame test simulates the internal part of the product. A small flame is generated under fault conditions and the risk of ignition is

Brand Name:YUYANG

Model Number:YYF059

Place of Origin:China

Needle Flame Tester Testing Machine Wire And Cable Burning Resistance Requirements: Faults in the product such as fault currents flowing through the leakage path, overheating of components or parts, poor contact, etc. may cause a flame, which may then be directed to nearby parts. The needle flame test simulates the internal part of the product. A small flame...

Brand Name:Haida

Model Number:6010-HD

Place of Origin:China

... test instruments. During measurement, the copper block is positioned 6±0.5mm above the needle flame burner. The flame is ignited, and the time required for the copper block temperature to rise from 100°C±5°C to 700°C±3°C must be within 23.5±1.0

Brand Name:Delta

Model Number:VFT

Place of Origin:China

...Flame Spread Test Apparatus Introduction: VFT ISO 15025 Flexible Materials Vertical Flame Spread Test Apparatus is suitable for the measurement of limited flame spread properties of protective clothing. The flame from the burner is applied for 10 s to the surface or the bottom of textile specimens which are vertically oriented. Features: VFT ISO 15025 Flexible Materials Vertical Flame Spread Test

Brand Name:VOUCH

Model Number:5112

Place of Origin:CHINA

Flame Glow Wire Test Apparatus For Fire Retardant Test Instrument Standard GB5169 1.The device is designed to carry out fire hazard testing on electrotechnical products in accordance with the provisions of International standards. 2.The control unit is ...

Brand Name:YUYANG

Model Number:SCV

Place of Origin:CHINA

... is a bench scale test to determine the resistance of a single cable to a 1kW flame application. It conforms to IEC60332-1-2 (flame propagation) and IEC60332-1-3 (test for flaming droplets). Standards: IEC 60332-1-1~3:2004 Features Stainless steel box, the

Brand Name:Hust Tony Instruments

Model Number:HTB-007

Place of Origin:China

...Test Apparatus-- Single-Flame Source Test Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame...

Brand Name:Hust Tony Instruments

Model Number:HTB-007

Place of Origin:China

...Test Apparatus-- Single-Flame Source Test Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame...

Brand Name:kingpo

Place of Origin:china

Model Number:KP-FT03

....5-2008,GB4706.1-2005 ,etc. Needle Flame Tester uses Needle-shaped burner in required size (Φ0.9mm ) ;transport butane gas into it ,ignite the specimen at a regular time and angle of 45° ,to check whether the ...