software testing test

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I15

...Test Rod ,Test Probe 32 Product information: The test rod probe confirms to IEC61032 figure 15 requirements. It is intended to verify the protection provided by fan guards against access to hazardous mechanical parts. It is equipped with nylon handle. Customizable: It is used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer). Standard:IEC61032 test

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I30

... Testing Product information: The small test probe conforms to the IEC 60065 standard requirement. It is used to test for the electronic equipment to see whether the hidden dangerous parts of the terminal device of can be touched. Technical parameters:

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I18

...Test Hook Probe Product information: The test hook complies with IEC60065. It is used to test whether the dangerous electric parts can be touched. The test hook is “hooked” into vents and seams in the enclosure & then pulled with a force (usually 20N). The hook has a hole at its long end, for use in conjunction with a PFI series Force Gauge. It is made entirely of stainless steel. Technical parameters: Parameters/Model Test...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I19

Test Plug For Mechanical Tests On Antenna Coaxial Sockets Product information: This test plug conforms to IEC60065 Figure 8 standard requirement. It is used to test the antenna coaxial socket which is installed on the device and equipped with parts or ...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I28

.... It is used for interlocking apparatus of the covert door of microwave oven. Customizable: it can be used for anti-electric shock test when it is equipped with amphenol connector or used for enclosure protection test when open threaded hole of M6 at

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I20, HT-I21

... to test whether the live parts inside can be touched. The HT-I21 test probe with 1N force is for testing whether the live parts with the protection of socket can be touched. Technical parameters: Application method: Touching the specimen with the end of

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I05

...Test Probe 1 Product information: This test sphere probe confirms to IEC61032 figure 5 test probe 1,IEC60335,IEC60950, IEC60598,UL507 standards. It is intended to verify the degree of protection of enclosures against ingress of solid foreign objects having a diameter of 50mm or greater. It is also regarded as the steel ball for dropping impact test. It can be equipped with a lifting ring, and used for pendulum bob test

Place of Origin:China

Brand Name:HongCe

Model Number:DC-3

... (IP code)> Fig 2, IEC60598-1-2008 and etc. It artificially simulates the dust environment to test the dust-proof ability of the test samples. The test device is suitable for electrical products’ sand and dust test of first characteristic numeral 5

Place of Origin:China

Brand Name:HongCe

Model Number:KL-1

...Test Apparatus Product information: This test device conforms to the standard requirement of GB/T2951.31.9-2008. It is applicable for the PVC wire and cable to do the winding test before the split test in the condition of high temperature. It is the auxiliary means for the split test. It is also used for the winding test...

Place of Origin:China

Brand Name:HongCe

Model Number:CBT-1

... wire core whose diameter is small and the sector-shaped insulation wire core which can not be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test. The diameter of the mandrel shall be between 4

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I99

Test Finger Probe , IEC 60335 Testing Probe Kit With Carrying Case Product information: 1.IEC Jointed Finger Probe 2.50mm Impact Test Ball 3.Test Pin Probe: short 4.Rigid Finger Probe 5.Ball Pressure Tester 6.Telecom Test Probe Meets Requirements for Testing...

Brand Name:HongCe

Model Number:CP-1

Place of Origin:China

...Testing Apparatus IEC 60884-1 Figure 8 Product details: The apparatus for compression test of 24.5 is desgined and manufactured according to IEC 60884 fig 8, it is used to test the compression resistance of test specimens. It consists of steel pressure plate , steel base and 300 N weight, the operation method is by manual. Test principle: The specimens are subjected to a compression test...

Brand Name:HongCe

Model Number:VH-1

Place of Origin:China

...Testing 2J Stainless Steel Vertical Impact Test Apparatusr IEC60068-2-75 Product information: The vertical impact hammer test apparatus is designed and manufactured according to the standard requirement of the IEC60068-2-75 Test Ehc. it is used to test...

Brand Name:HongCe

Model Number:SW-1

Place of Origin:China

...Test Equipment Splash Water Test Device Product information This splash water test device is according to the standard requirement of IEC60335-2-64 clause 15.1.1 and 15.1.2 to manufacture,In addition, IPX1, IPX2, IPX3 and IPX4 appliances are subjected for 5 min to the following splash test. The apparatus shown in Figure 101 is used. During the test...

Brand Name:HongCe

Model Number:WR-1

Place of Origin:China

...gauge B 89mm. Conforms to BS EN 13126-5 (Figure A.2). Material: Made of Nylon. We are a professional manufacturer of safety test equipment, with 10 years experience, advanced technology production processes, strict control of quality. We are specialize in

Brand Name:HongCe

Model Number:DP-1,SSW-1,SN-1,SN-2,WCS-1,WTP-1,TS-1(cost additional)

Place of Origin:China

...Test System Product Introduction: The water-proof testing equipment is manufactured in accordance with the standard of Clause IEC60529 IPX1 to IPX8 testing purpose. The machine is provided with standard test program, which is available to be selected for testing purpose without any presetting. There is also provided with user-defined program, the test...

Brand Name:HongCe

Model Number:HJAU

Place of Origin:China

...Test System 7min/pc 5bar Pressure This helium hood lea test system for SF6 switch gears is with rectangular bell vacuum chambers, two chambers can work linkage, the cycle time is 7 min/pc, can filling helium pressure 5bar, detect large workpiece by helium hood. Test Schematic: Test Procedures: Charge high pressure gas into the product for gross leak test and proof test...

Brand Name:HongCe

Model Number:HDX1302

Place of Origin:China

...Test object Completed flexible cables Test Flexing test Standard IEC60245-1, IEC60245-2 figure 1 Current loading 0-25A Voltage loading 0-400V Testing speed 0.33m/S Testing distance 1000mm Suitable cores 2-18 Nominal cross-sectional area 0.2~4mm2 Diameter of pulleys 3 piece, 60, 80, 120, 160, 200 for options Combined weights 0.5kg, 1kg, 1.5kg, 2kg, 2.5kg, 3kg, 3.5kg, 4kg, 6kg, 7.5kg, 8kg Fault testing...

Brand Name:HongCe

Model Number:HB6204

Place of Origin:China

...vibration test can be used to find early failure of the battery, simulate actual condition assessment and structural strength test. The product has a wide range of applications, wide application area, and significant and reliable test results. It is an

Brand Name:HongCe

Model Number:EID-3

Place of Origin:China

...Test Apparatus EID-3 Product information: The test machine complies with IEC60065:2014 clause 12.1.2, IEC 60335-2-24 Clause 21.101. Used for repeat drop strength test for various types of camping appliance. The test times can be preset; it will automatically stop when the test times reaches to the setting value. It is easy to operate. Work principle: The test...