wire test equipment

Brand Name:Sinuo

Model Number:SN2210-4

Place of Origin:China

....4, IEC 60529 IP4, etc. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire. It comes with

Brand Name:PEGO

Model Number:GW-1

Place of Origin:China

...Testing Equipment Glow Wire Tester with Observation Window 1. Standard of Glow Wire Tester: The glow wire tester is designed as perIEC60695-2-1, IEC60695-2-10~IEC60695-2-13 (GB/T5169.10-2006~GB/T5169.13-2006), < basic testing methods of Glow wire, basic methods of Glow wire device> and IEC829, UL 746A, DIN695, VDE0471 etc. standards. 2. Introduction of Glow Wire Tester The glow wire...

Brand Name:PEGO

Model Number:PG-TPD

Place of Origin:China

...Testing Equipment Test Probe D for IP4X Testing Test Wire According to IEC60529 Introduction: Designed according to IEC61032 figure 4, meet the requirements of IEC60529-IP3,IEC60065,IEC60598 and etc. This wire is intended to verify the protection of persons against access to hazardous parts. It is used to verify the protection against access with a wire. Specification: Length of test wire: 100mm Diameter of test wire...

Brand Name:I-SUNTOP

Model Number:LX-8815A

Place of Origin:china

...Wire Abrupt Pull Test Equipment I-suntop wire and cable Testing machine20220301.pd... 1. Description of UL817 Standards Plug Wire Abrupt Pull Test Equipment The sudden pull test machine is designed according to the relevant technical requirements of the UL817 standard. It is suitable for the sudden pull strength test, torsion test, load test and grounding wire current test of the conductor wire...

Brand Name:HongCe

Model Number:HDX1304

Place of Origin:China

... 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.3 and Figure 3 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods. It is used for checking the

Brand Name:YUYANG

Model Number:YY081

Place of Origin:China

... requirements of IEC60695-2-10,UL 746A ,GB/T5169.10,GB4706.1.It makes required material(Ni80/Cr20) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test temperature( 550 ℃ ～ 960 ℃) for 1min and then broil the

Brand Name:Kinte

Model Number:WH-8901JK

Place of Origin:Guangdong,China (Mainland)

...Test Equipment 0.5M3 Glow Wire Test Apparatus ​ Glow wire test is IEC6 0695-2-10: 2000 ~ IEC6 0695-2-13: 2000 Glow Wire / Hot Wire, Basic Test Method, Glow-wire Test Device and General Test Procedure and UL 746A, IEC829 DIN695, VDE0471 The use of non-flame ignition source program simulation test project. Glow wire tester will specify the material (4Ni80 / Cr20) and the shape of the heating wire...

Brand Name:PEGO

Model Number:ZRS-2

Place of Origin:China

...Test Equipment 1000℃ Glow Wire Test Apparatus 1. Introduction The glow wire test apparatus is designed according to IEC60695-2-10, UL746 and GB/T5169.10. The specific material and sharp heating wire is heated to specific temperature (550 ℃~960 ℃) for 1 min by max current, then vertical burns the EUT with certain pressure (1.0N) for 30s, then check if the test...

Brand Name:HUATEC

Model Number:HRD-120

Place of Origin:China

...Wire Rope Non Destructive Testing Equipment Internal External Broken Wire Inspection Machine 一. Product overview ◆ On-line detection of wire rope internal and external broken wire, wear, rust, deformation, loose strands, skip wire, material changes and other defects. ◆ The test result report can meet the standards of different industries and has the number of broken wires and the ratio of broken wire...

Brand Name:BAXIT

Model Number:BXT-GW

Place of Origin:Shanghai, China(mainland)

...Wire Tester Flammability Testing Equipment Glow wire tester is designed and manufactured according to the requirements of "Glow Wire Test Method" in IEC60695, GB5169.10-11 and GB4706.1. It is suitable for electric fire electronic products, household appliances and their materials for ignition hazard test...

Brand Name:kingpo

Model Number:KP-GWT01

Place of Origin:china

...Wire Tester , glow wire tester without test chamber , IEC 60695-2-10 Glow Wire Tester Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A .It makes required material(＞77%Ni/20±1%Cr) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test...

Brand Name:HOOHA

Model Number:ZY6017B-VB

Place of Origin:China

... performance of hard foam plastics in laboratory conditions. The design conforms to GB/t8333-2008 "test method for the test method for the combustion performance of hard foam plastics". Meet the standard: Standard GB/t8333-2008 "test method for the

Brand Name:Kingpo

Place of Origin:China

...Testing Equipment Thermostatic Control Oil Bath For Wire Industry 1. Quick Details: Alternative name High temperature oil bath Function Test capability of cables under high constant temperature Feature Electric drive Weight 87kg Volume 500×400×400(MM) Test standard JIS-C-3005 2. Equipment Description: The constant temperature oil bath is used for testing properties of insulating materials of cable and wires...

Brand Name:DAXIAN

Model Number:DX8391

Place of Origin:China

... to the surface of combustible substrates under laboratory conditions. Conform to the standard: meet the requirements of GB/T 12441-2005 (Appendix C) test standard. Main parameters: Test station: 1 station. Test board size: L300*W150 thickness is 5mm, and

Brand Name:Sinuo

Model Number:SN7712

Place of Origin:China

...Testing Equipment Complied Standards & Clauses The consumables are for various of flammability test chambers, such as glow wire test apparatus, needle-flame test apparatus, tracking leakage test apparatus, horizontal and vertical burning test apparatus, etc. Equipment Overview Name Accessories for flammability testing equipment as following: Glow Wire...

Brand Name:PEGO GROUP

Model Number:GW-1H

Place of Origin:China

...Wire Test Apparatus Fire Hazard Safety Testing Equipment 1. Introduction The glow wire tester is designed according to IEC60695-2-10 t0 IEC60695-2-13, UL746A, IEC829, DIN695 and VDE0471. The specific material and sharp heating wire is heated to specific temperature (550 ℃~960 ℃) for 1 min by max current, then vertical burns the EUT with certain pressure (0.95N) for 30s, then check if the test...

Brand Name:HeJin

Model Number:HVW-1

Place of Origin:China

...Testing Equipment For UL1581 Electric Wire And Cable With Adjustable Combustion Angle Standard: UL 1581 Reference Standard for Electrical Wires, Cables, and Flexible Cords. Application: It is applicable for the finished wire and cable, or soft-line to do 1060 vertical combustion and FT1 test, 1061 cable combustion test, 1080VW-1(vertical specimen) combustion test, 1090 electric wire...

Brand Name:Sinuo

Model Number:SN1112C

Place of Origin:China

...Clause 23.3 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements. It is used to conduct flexing resistance test on the electrical connections and internal wires of different parts of the appliance that can

Brand Name:HongCe

Model Number:GW-2

Place of Origin:China

...Wire Flammability Testing Equipment Up to 960°C for IEC 60695 Fire Hazard Evaluation Product Description HongCe’s Glow Wire Test Apparatus is built for labs that take fire safety personally. With stable PLC temperature control, a robust safety enclosure, and repeatable test...

Brand Name:DAXIAN

Model Number:DX8369

Place of Origin:China

...fire tests -- Ignitability of building products subjected to direct impingement of flame -- Part 2: Single-flame source test" Scope of application: It is applicable to the test method for judging whether the building material has flammability under